AIR FLOW METER - ANEMOMETER
Measure Air Flow Anywhere(inside/Outside)TemperatureChill factorRelative HumidityAltitude APPLICATIONS air flow are: (1) Outside Air anywhere; (2) Inside Air anywhere, HEATING and COOLING REGISTERS in Floor and Wall; FLUE EXHAUST Gas Speed either positive or negative pressure. Meter reads fpm (feet per minute), cfm (cubic feet per minute), mph (miles per hour). It also measures the temperature, chill factor, relative humidity, altitude (must be calibrated). The altitude must be calibrated and set on the altitude where you live. Right-side red buttons control your type of measurement It also has a vertical arm extension for the fan vane. Left side red button controls a light located in upper top right-side. A carrying case is included. To order or purchase call 319-298-0500.
Measure the air outside anywhere, sailing, mountain top, in your car mph (miles per hour).
You can Measure the Room-Air speed coming out of your Floor and Wall Register. Adjust the branch-duct damper feeding this room to adjust the correct speed coming out of the register. You can also adjust the vane controls in the register which is a way to make your duct system balance.
Another example is the flue exhaust speed inside the combustion chamber of a heating corn/pellet stove, insert or boiler. You can also measure flue exhaust air flow through a kitchen hood exhaust motor.
This AIR FLOW METER or ANEMOMETER will enable you to control your air flow by measuring it inside the combustion chamber of a wood pellet stove, insert, or furnace. . You place the Meter inside the combustion chamber with the fan turbine blade at the rear where the air comes into the combustion chamber. After you set the meter inside the combustion chamber, shut the door, turn the stove on with with flue exhaust fan coming on immediately and you read the meter through the glass door window. The Fresh Air DAMPER is then adjusted accordingly to set the speed of air flow or flue exhaust flow through the combustion chamber. This meter with also measure air temperature. It has a large, easy-to-read backlit LCD including primary and secondary displays plus numerous status indicators.
This Anemometer is recommended for use by most corn stove and wood pellet stove manufacturers. Installers of Rear-Mounted Flue Exhaust Kits frequently use this Anemometer. Check out our other Corn Stove items listed.
REAR-MOUNTED FLUE EXHAUST FANS
Corn and wood pellet stove manufacturers that have Rea-Mounted Flue Exhaust Fans should have in the operating instructions on how the air (flue) flow should be measured by an Anemometer. Fan motors that do not have a "split capacitor" can not have the speed varied by a rheostat, and you have to use a damper to vary the speed. The stove FRESH AIR DAMPER can be adjusted (opened or closed) to regulate the flow of air or flue exhaust gas. See the enclosed PICTURES of the Anemometer, Rear Flue Exhaust Fan and a Gate Valve Damper.
PICTURES
- AIR FLOW ANEMEMOTER
- Rear-Mounted Flue Exhaust Fan
- Fresh-Air Damper
SHIPPING OR PERSONAL PICKUPFor shipping prices and an order call 319-298-0500. Customer may pick it up in person or have it shipped by either by USPS, Fedex, or UPS, weight with the package included is 5 lbs.
RETURNS and SELLER PROTECTION
Seller will allow return items if done within 14 days after purchase and returns must be paid by the buyer for both shipping and insurance. Item must not have been opened, used, or in a condition other than the one we sent to the buyer. ... If an exception is granted, the item must be repackaged and insured by the buyer so the shipping agent will not damage the product upon return. If item is defective and/or damaged in shipment by the Shipping Comapny, the seller may elect to either exchange item, replace item, or adjust the price to compensate for damage.
LEGAL JURISDICTION RESIDES WITH SELLER
The seller (dealer) resides in Cedar Rapids, Linn County, Iowa so legal jurisdiction remains with the seller's home base. Accordingly the parties (seller and buyer) consent to the exclusive jurisdiction of the federal and state courts located in Linn County, Iowa, in any action arising out of or relating to this sales agreement. The parties waive any other venue to which either party might be entitled by domicile or otherwise. Seller will be reimbursed by the Buyer for any legal fees, attorney's fees, and court costs incurred to enforce this contract.
SPECIFICATIONS
Weight 5 lbs, 9V Battery, .5 Amps, 3.9 ft of vane sensor cable, Vane Sensor Fan (with vertical extension if desired) , Display LCD, measures Air Temperature, Relative Humidity, Altitude, and Air flow in cfm, fpm, mph, carrying case included. For questions, comments, or purchase contact: Corn Stoves of Iowa, Corn and Wood Pellet Stove Dealer, 1312 1st Avenue, N.W., Cedar Rapids, IA 52405. Call for an order to: 319-298-0500.