FAN EXHAUST BOOSTER
BOOST YOUR EXHAUST, IMPROVE DRAFT, FOR LONG PIPE RUNS
Use for 20, 30, 40 FOOT Pipe Runs ...
Use this Fan Exhaust Booster for long chimney pipe runs. long horizontal runs, or a combination of both. It can be used for any fuel such as corn, wood, wood pellet, coal, and for any device such as fireplace inserts, stoves, and furnaces. It can be mounted both vertically as well as horizontally. It can be mounted on the roof top, chimney top, side of the house (or building). It should solve your draft problems. It is rated for CORN burning stoves and furnaces and its cast-aluminum, stainless steel design will eliminate the corrosion problems created with corn-burning flues. It is the only exhaust fan made that is building-department approved and certified for corn-burning appliances. It can also be used in wood, wood-pellet, and coal burning appliances. It produces up to 450 cfm and will withstand intermediate temperatures up to 575 Degrees Fahr. It comes with a Wall Control Switch, a rheostat (see 3rd picture) for on/off and variable speed control. Although it is expensive, it can make the difference between either having or not having a corn/pellet burning appliance in your house with long runs. Customers buy this Fan Exhaust Booster in cases where they do not have other choices and it becomes a necessity. Note: Fan includes a Wall Rheostat Speed Control at no charge. Further Note: This fan also needs a stainless steel ADAPTOR plate with a pipe stub beneath it (see options) that we sell for $195.00 (Shown in the 4th Picture). This adaptor plate is 304 Stainless Steel 16 gage thickness. This plate/pipe stub will hook up to your existing pipe with a STAINLESS increaser/decreaser adaptor $35.00. Check out our other Corn Stove items listed in our Ebay Store.
Ebay Rules allow the highest bidder to Buy-It-Now immediatelyCOLOR=red> with an early auction ending. There has to be more than 12 hours left in the listing. To do that call us at 1-319-298-0500COLOR=red> or contact us at Ebay's Ask-a-questionCOLOR=blue> located at the bottom of this listing in the far lower left-hand side or use Ebay's Contact Seller. This is consistent with Ebay rules and we have no intent to bypass them or bypass Ebay in a sale.
The options are as follows: (1) Base Model 12"x12" $1455, base 14"x14" $1725, base 16"x16" $1995, base 19"x19" $2695; (2) Wall Rheostat Speed Control included no charge (see 3rd picture); (3) Base Plate Adaptors $195 (see 4th picture) 304 Stainless 16 Gage; (4) Pipe increaser/decreaser Adaptor Stainless $35; (5) Wall Speed and Draft Controller $450 (see 3rd picture), (6) Proven Draft Switch $100, (7) Speed Controller (for Gas) with Draft Switch $550; (8) Chimney Exhaust Fan Brochure $20.
This fan is UL Approved and Building Department Approved. The certified listings are: UL378 - Draft Equipment, CSA-CAN3-B255-M81-Mechanical Flue Gas Exhausters, ETL Listing #E109205550D. The building department approvals are: The City of New York Department of Building, City of Los Angeles, The Commonweath of Massachusetts (G1-1295-29), just to name a few, CE Complaint Certification.
There is a 2 year Warranty against defects in material and workmanship and a 10 year warranty against corrosion. This is the only exhaust fan booster building department-approved and certified for corn-burning appliances. Other fans and motor will deteriorate from corrosive corn-burning exhausts.
SHIPPING OR PERSONAL PICKUP
Customer may pick this item up in person or have it shipped by either by USPS or UPS, weight with the package included is 35 lbs.SPECIFICATIONS
Weight 30 lb, Base is 12" X 12" wide, Height is 10", cast-aluminum housing 3/16" thick, stainless steel axial fan-blade vanes, 110 VAC, 1-4 AMPS, 5 AMP Fan Speed Control (Rheaostat), Motor is split capacitor, totally enclosed, Class H insulated, 1P54 Protection Class, Sealed Ball Bearings, Variable Speed, Thermal Overload Protection, 2" X 4" Junction Box with cover and conduit, 450 CFM, 110 VAC wiring is required by a licensed electrician; Base-Plate Adaptor is 304 Stainless Steel with 16 Gage thickness: 575 DEGREES FAHR Intermediate and 482 DEGREES FAHR continuous.; UL Approved, Building Department Approved. Manufacturer: Spec Made Fans.QUESTIONS
Remember to check our Ebay Store for other related items. For questions or comments or execute a Buy-It-Now over Ebay contact: Corn Stoves of Iowa, Corn and Wood Pellet Stove Dealer, 1312 1st Avenue, N.W., Cedar Rapids, IA 52405, 319-298-0500, FAX 319-298-0500 (call to turn FAX on), E-mail: Use the Ebay Ask-a-question system that is highlighted in blue located at the bottom of the listing in the far lower lefthand side .....